AUTOFLAME MK8 User Manual

7
First Outs
Flame Safeguard (MM80001/FSG) Manual
Page | 94
7.3.3 First Out Function
In the First Outs screen, press on the First Out number to be configured and select the function of first out when
upon the active state set for high or low.
Function When Active
Description
Disabled
Does not function.
Monitor
Burner continues firing, but the events will be logged.
Non-recycle
Burner stops firing and the first out must be reset for the burner to restart.
Recycle
Burner stops firing and restarts automatically when the input state changes.
Stop EGA Sampling
Burner continues firing, but the EGA stops sampling.
Stops EGA Trimming
Burner continues firing, but the EGA trim stops operating.
External Stat
Used if external stat is optioned.
Figure 7.3.3 Configuring a First Out

AUTOFLAME MK8 Specifications

General

Brand	AUTOFLAME
Model	MK8
Category	Controller
Language	English