1.1.1
Autoflame Flame Safeguard Main Features
• 12.1” Full colour touch screen
• 120V or 230V standard operation 50/60Hz
• 4 independent fuel programmes
• Internal flame safeguard – full flame supervision with self-check UV, IR & Flame switch.
• Dual flame scanner operation (IR and UV scanners)
• Gas valve train leak supervision via Autoflame gas pressure sensor as a low gas pressure limit
• Air pressure proving and monitoring via Air switch
• 128 lockouts, errors, alarms and warnings stored with date, time, phase and reset
• 1000 entry system log stored with date, time and status
• Burner control safety times user selectable
• Password protection of all safety related functions
• Infra-red port for upload/download of commission data
• First out annunciation inputs
• Download / upload all commissioning data and controller settings from MM module to a PC via
Bluetooth or IR
• Direct Modbus communications to BMS or remote monitoring and control
• Flame Safeguard mode, which allows the MM to operate as a standard Flame Safeguard.
To Next Page
Loading...
Need help?
General
