Name: Automation Technology C5 Series
Brand: Automation Technology
Rating: 4 (1 reviews)

To Next Page

To Previous Page

C5 Series User Manual Rev. 1.4



Single Slope Mode (Default Mode)

Weld Seam

Dual Slope Mode (1 Knee Point)

Weld Seam

Triple Slope Mode (2 Knee Points)

Weld Seam

Intensity

Saturation

Exposure Time

100%

Exposure

Time

Intensity

Saturation

Threshold 1

100%

Exposure

Limit 1

Knee Point 1

Intensity

Saturation

Threshold 1

Saturation

Threshold 2

100%

Exposure

Limit 1

Exposure

Limit 2

Exposure

Time

Knee Point 1

Knee Point 2

Default Chapter3
- Table of Contents3
- C5 Series Overview7
Introduction7
The C5 Series General Specifications8
- The Sensor Specifications10
- The Sensors Spectral Response15
- Temperature Range (Operation/Storage)16
- Heat Dissipation16
  - General Guidelines for Heat Dissipation16
  - Using the C5 Heat Sink17
- Mechanical Drawings18
- Lens Protection Tubes for the C5 Series23
- Subpixel Limitations24
- C5 Series Operational Reference25
Measuring Principle25
- Geometry 125
- Geometry 226
- Geometry 326
- Geometry 427
The C5 Sensor Algorithms28
- The Image Mode (IMG)28
- The Maximum Intensity Profile Mode (MAX)29
- The Threshold Mode (TRSH)30
- The Center of Gravity Mode (COG)31
- The FIR Peak Mode (FIR PEAK)32
The FIR Filter Function33
The High Dynamic Range 3D Feature (HDR-3D)34
- Multipleslope Function34
The Data Output Format38
- The Data Channel Assignment DC0, DC1 and DC238
- The Output Frame Structure40
  - Index Definition41
  - Examples of Output Frame Structure41
The Advanced AOI Functions44
- AOI-Search44
- AOI-Tracking44
The C5 Series Triggering Mode45
- Description of Profile Trigger Modes45
- Trigger Control - RS422 Resolver46
- Description of Modes for Triggering of Sequencer/Frame and Profile Acquisition48
The C5 Series Chunk Data Mode50
- General Description50
- Payload Layout in Chunk Data Mode51
- XML Descriptors and ID's52
- Chunk Data Structure53
The Gige-Vision Events54
The Web Interface55
The External C5-IO-Panel (Breakout Board)57
- Mechanical Drawings57
- Clamp Configuration58
- Mechanical Dimension59
The C5 Series I/O Schematics60
- I/O and Encoder with Differential TTL-Mode for RS422 (Standard)60
- I/O and Encoder with Differential HTL-Mode for RS422 (Option)61
- I/O and Encoder with Single Ended HTL or TTL Mode for RS422 (Option)62
- Part Number for I/O and Encoder Option63
  - Encoder / Resolver Input Specification63
- Laser Connection with Analog and Digital Modulation64
- Master/Slave Connection65
  - Example Configuration for Master/Slave Connection65
The Digital Outputs66
The C5-Gige Interface67
- The Gige Interface67
- The I/O & Power Interface68
- Description of Leds69
The C5 Series Cables70
- Cables for Power, I/O and Laser Control70
- Wire Assignment of M12 17 Pin Pigtail Cable71
- Cables for Gige Interface72
- Orientation of Angled Adapter Cable74
The C5 Series Genicam Features75
- Device Control75
- Image Format Control75
- Acquisition Control75
- Camera Control75
- Light Control76
- Camera IO76
- Trigger Control77
  - RS422 Resolver77
  - Autostart77
- Transport Layer Control77
  - Gige Vision77
- User Set Control77
- Chunk Data Control77
- Event Control77
- File Access Control77
Additional Features for Scatter Firmware78
- C5-2040-SCT-Gige78
- Cxexplorer Overview82
The Cxexplorer82
Cxexplorer Features83
- Image Wizard83
- Image Mode84
- 3D Wizard84
- 3D Mode85
- Quickstart a C5 Camera86
- Cxsoftware Development Kit87
- Service Information88
Product Information and Updates88
Warranty Conditions89
- Warranty Period89
- Extended Warranty89
Return Policy89
Document Revision90

Questions and Answers:

Need help?

Do you have a question about the Automation Technology C5 Series and is the answer not in the manual?

Automation Technology C5 Series Specifications

General

Brand	Automation Technology
Model	C5 Series
Category	Accessories
Language	English

Automation Technology C5 Series User Manual

Table of Contents

Questions and Answers:

Automation Technology C5 Series Specifications