82
C5 Series User Manual Rev. 1.4
Image Mode
The image mode enables the output of the 2D CMOS sensor images of the camera. That
can be helpful e.g. to set and optimize the laser power, the Area Of Interest or the
exposure time.
(2D greyscale image)
3D Wizard
With the 3D Wizard the camera mode can be easily switched to 3D mode. Set the number
of profiles per frame, choose the 3D algorithm, set the integration time and select the
number of subpixel. Enable the required Output Channels and select the trigger mode to
finish the wizard.
To Next Page
Loading...
Need help?
General