Automation Technology C5 Series - Page 47

C5 Series User Manual Rev. 1.4

45
(1): Off (Value= 0)
(2): On (Value= 1)
TriggerCoordinateCountAlways
IBoolean
RW
Guru
TRUE: Count trigger coordinate always, FALSE: Count trigger
coordinate during image acquisition only
UseAlternateResolverInputs
(*)
IBoolean
RW
Guru
Use IN1/IN2 instead of A/B as inputs
UseAlternateResolverInputsInverted
(*)
IBoolean
RW
Guru
Use inverted IN1/IN2