Automation Technology C5 Series - Page 9

C5 Series User Manual Rev. 1.4

7
Electrical Interface
Camera Supply
+10V to +24V DC (max. +27V DC)
Power consumption
6 W…10 W (depending on camera type)
Operating Temperature
0°C to +50°C (non-condensing)
Output Data Interface
Gigabit Ethernet (IEEE 802.3)
Communication Protocol
GigE Vision with GenICam
Mechanical Interface
Camera Size
55 mm x 55 mm x 66 mm
Mass (without optics)
250 g
Power connector
17 pin, M12 connector
Ethernet connector
8 pin, A-coded M12 connector
Mechanical Stress Specification
Vibration (sinusoidal each axis)
1 g, 10…2000Hz
IEC 60068-2-6
Vibration (random each axis)
5 g, 5…1000Hz
IEC 60068-2-64
Shock (each axis)
50 g
IEC 60068-2-27
Enclosure rating
IP67
IEC 600529