6 System Screen
94 © Copyright Reserved Autonics Co., Ltd.
6.5.3.2 Logger conditions settings
No. Function and operation
①
The serial number of data logger. Supports it up to 8.
Touch each number and you can delete the saved data or set logger conditions.
②
Displays channel information (Channel 1, Channel 2, Internal).
③
Displays address.
④
Displays save device.
⑤
Displays save device type (BIT, WORD).
⑥
Displays the continuous number of the set logger condition’s device
In case of conditional logging, the continuous number of device is fixed as (1) by logger
characteristics.
⑦
Displays the repeat number of set logger condition.
⑧
Displays the set logger condition (period logging, conditional logging).
⑨
Set the saved data logger function. Touch this, it switches ‘USE’ or ‘NO USE’.
⑩
Delete all the saved data loger data.
⑪ Select to-be deleted series number (①) and touch to delete the selected logger data.
⑫
Select to-be set series number of data logger and touch the properiate button to move
logger condition setting menu.
To Next Page
Loading...