Autonics LP-S070 - Page 95

6 System Screen
© Copyright Reserved Autonics Co., Ltd. 95
6.5.3.3 Period logging
Period logging reads the set save device value at the desiganted time and saves it.
(1) Period logging setting
Touch to-be set number as data logger and touch ‘Logger Set’ and ‘PERIOD LOGGING’
screen is displayed.
No.
Function and operation
①
Touch this, it moves to period logging setting screen, or conditional logging setting
screen.
②
Logging operates by the set time type.
 Random: Designate time interval to activate log function from the current time.
 Every Hour: Designate minute and second to start logging.
 Every Day: Desigante hour, minute, second to start logging.
 Every Week: Designate the day of week, hour, minute, second to start logging.