EasyManuals Logo

Autronica AutroVoice miniVES Series User Manual

Autronica AutroVoice miniVES Series
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
91
3
System Connection / Upload (PC -> System)
This allows to send a conguration, created on a PC running the congurator software to the AutroVoice miniVES system
connected to that PC. Prior to sending the conguration to the system, the software veries the conguration le. Upload full
conguration – sends the entire conguration from the PC to the system, including audio les in the PCM format. Loading of
a full conguration must be executed for the rst time an empty system is being programmed, every successive congura-
tion change which does not require changes in audio les may be loaded into the system via Upload conguration without
audio which makes programming of the system much faster.
4
System Connection / Download (System -> PC)
This allows to download the current full system conguration or the conguration prior to the current one from system into a PC.
5
System Connection / Recreate Topology
This function reads the system architecture. The system is able to identify cards located on a particular slot of the control
unit, it detects all zone and reman microphones connected and the method and place of connection of the units and
microphones (optical bre, cat5). Caution: the only element which is not detected by the system recreating topology
are microphone extensions.
6
System Connection / Change password
Allows to change the previously set password needed to upload the conguration to the system. The change is authorized
either by entering the previous password or by generating a token. The token is created by Autronica after received a ve
digit code generated by the Control Unit GUI (applies only to units equipped with LCD screens).
7
System connection / Sync system UTC with local
This option synchronizes the system’s internal clock with the time on the computer running the congurator software.
8
System Connection / Blackbox
The Blackbox function records audio from all connected DFMS reman microphones while the alarm mode is active.
Download blackbox buer retrieves the data stored in the microphones. Clear blackbox buer - erases all the messages
recorded during alarm mode.
9
System Connection / Record message
If this function has been enabled in the system you can download the messages recorded by DFMS, DMS or DMS-LCD
microphones by clicking Download record message buer. Clear record message buer deletes all the messages.
q
Project signature
The project signature acts as a key which is needed for remote server access. If the system is set up correctly and the
conguration has been sent to all the devices, the project signature should be sent to the remote access server administrator.
NOTE: After changing the signature the server with remote access will no longer be able to connect. The access rights are
assigned to the administrator (key), but also to a specic system with given signature.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Autronica AutroVoice miniVES Series and is the answer not in the manual?

Autronica AutroVoice miniVES Series Specifications

General IconGeneral
BrandAutronica
ModelAutroVoice miniVES Series
CategorySecurity System
LanguageEnglish

Related product manuals