Autronica BS-420 - Page 103

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 103
Step Actions to be taken Display Indication
2
To select SERVICE, press 5.
3
To select TEST, press 1.
4
To select DETECTION ZONE TEST, press 1.
5
To ENTER TEST MODE, press 1.
6
Use the keyboard to enter text into the input box
-
OR ,- as shown in this example:
To select a Zone Name, press
then scroll downwards or upwards by pressing
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS
SERVICE
TEST
1 DETECTION ZONE TEST (EN 54)
2 OUTPUT TEST
19:23
SERVICE
DZ TEST
1 ENTER TEST MODE
2 LEAVE TEST MODE
19:23
SERVICE
DZ TEST
1 ENTER TEST MODE
2 LEAVE TEST MODE
19:23
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP
SERVICE
19:23
ENTER TEST MODE DZ
Zone Name:
CANTEEN
KITCHEN
OFFICES
WORKSHOP