Restoring system configuration from USB device using ACLI
Procedure
1. At the command prompt, enter enable to enter the Priviliged EXEC ACLI mode.
2. At the prompt, enter copy config usb {filename <name> | unit
<1-8>}.
Restoring system configuration from TFTP using ACLI
Procedure
1. At the command prompt, enter enable to enter the Priviliged EXEC ACLI mode.
2. At the prompt, enter copy tftp config address <A.B.C.D> | <WORD>
filename <name>.
Restoring system configuration from SFTP using ACLI
Procedure
1. At the command prompt, enter enable to enter the Priviliged EXEC ACLI mode.
2. At the prompt, enter copy sftp config address <A.B.C.D> | <WORD>
filename <name> username <WORD>[password].
Copying stack unit configuration to standalone switch using ACLI
Procedure
1. At the command prompt, enter enable to enter the Privileged EXEC ACLI mode.
2. At the prompt, enter copy [ tftp | sftp ] config address <A.B.D.C>
| <WORD> filename <name> unit <unit number>.
ACLI configuration files
Fundamentals December 2011 57
To Next Page
Loading...
