When a call is answered at a monitoring deskphone, the user can begin the transfer process of
transferring the call to the monitored station by pressing the Team Button. The monitoring
deskphone puts the existing call on hold and places a call to the monitored station. A speech path is
established and the monitoring station and monitored station can converse. To complete the transfer
between the original call and the monitored deskphone, the monitoring station can disconnect the
call by going on-hook or by pressing the Complete softkey.
Related Links
Team Button parameters on page 109
Team Button parameters
Parameter Default value Description
TEAM_BUTTON_REDIRECT_IND
ICATION
0 Controls if the redirection
indication is shown on a Team
Button on a monitoring station.
Valid values are 0 and 1.
TEAM_BUTTON_REDIRECT_OV
ERRIDE
0 Specifies whether the monitoring
deskphone can override the SAC,
CFWD, ECF features set by the
monitored deskphone. Valid
values are:
• 0: Monitoring deskphone cannot
override the features.
• 1: Monitoring deskphone cannot
override the features by placing
the call to the monitored
deskphone.
• 2: Monitoring deskphone
displays a message to the user
asking if the call should be
placed to the monitored
deskphone.
Note:
The value of this parameter is
stored in PPM.
TEAM_BUTTON_RING_TYPE 3 Specifies the default ring tone for
all Team Buttons. Valid values
are 1 to 8.
TEAM_BUTTON_RING_TYPE_P
ER_BUTTON
NULL Specifies a list of name-value
pairs that indicate default ring
tones.
Related Links
Team Button overview on page 108
Team Button overview
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 109
Comments on this document? infodev@avaya.com
To Next Page
Loading...
