Avaya 9601 - Account and Password Parameters; Presence Parameters

Parameter Type Default
value
Description
• 2: No PAE multicast pass-through or proxy Logoff.
DOT1XEAPS String MD5 Specifies a list of EAP methods for IEEE 802.1x
authentication. For now, the values supported are
TLS and MD5.
Account and password parameters
Parameter Type Default
value
Description
PROCPSWD String 27238 Specifies the password to gain administrator rights
for local procedures on the device.
Presence parameters
Parameter
Type Default
value
Description
ENABLE_PRESENCE Integer 0 Enables presence tracking of users in the Contacts
list. Assign one of the following values:
• 0: Disabled
• 1: Enabled
PRESENCE_SERVER String Null Specifies the an address of the Presence server.
The value of PRESENCE_SERVER is obtained from
the PPM when the presence profile is downloaded.
The PRESENCE_SERVER address obtained from
the presence profile takes precedence over the value
set in the 46xxsettings file. If you do not set this
parameter, the deskphone automatically determines
the presence server address, but the Instant
Messaging feature will not work.
PRESENCE_ACL_CONFIRM Integer 0 Specifies the handling of Presence ACL updates.
When a watcher list is received (presence.winfo
NOTIFY) which contains one or more watchers with
the pending status, the value of this parameter
Table continues…
Account and password parameters
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 63
Comments on this document? infodev@avaya.com