• User modification of certain parameters, when given administrative permission to do so.
Note:
Not all parameters can be administered by all administrative mechanisms. See the applicable
chapters in this guide for specific information.
Related Links
Administrator responsibilities on page 15
Administration methods
You can use the following methods to administer the devices. The following table lists the parameter
categories that you can administer through each of the corresponding methods.
Method Can administer
IP addresses Ethernet
Interface
Tagging and
VLAN
Network
Time Server
Quality of
Service
Application-
specific
parameters
DHCP —
LLDP — — —
Settings file —
Avaya Aura
®
Session
Manager
— — — —
Settings app
on the device
— —
Precedence of the methods
Most of the parameters are configurable through multiple methods. If you configure a parameter
through more than one method, the device applies the settings of the method that has a higher
precedence. For the parameters that are not backed up through PPM, the non-default value has the
highest precedence. The following list shows the precedence of the methods in the highest to lowest
order:
1. Settings app on the device. There is an exception of DHCP getting a higher precedence
when:
• IP address is set through DHCP.
• USE_DHCP parameter is set to 1 to assign a higher priority to DHCP.
2. Avaya Aura
®
Session Manager.
3. Settings file.
4. DHCP.
9600 Series IP Deskphones overview
16 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
