Avaya 9601 - Chapter 3: Configuring Avaya Aura; Supported SIP Environments; Button Modules Overview

Chapter 3: Configuring Avaya Aura
®
for
Avaya Deskphones SIP
Supported SIP environments
The SIP software supports the following configurations for the 9600 Series IP Deskphones :
• Avaya Aura
®
Session Manager with Avaya Aura
®
Communication Manager
• Failover and survivable interoperability with the following SIP gateways:
- Session Manager for survivable remote gateway
- Avaya Secure Router 2330 and 4134
- Audiocodes MP-series analog and BRI gateways
- IP Office
The deskphone features depend on the Communication Manager and Session Manager
configuration.
For more information about the configuration and operation of the deskphone features, see the
following Communication Manager documents:
• Avaya Aura
®
Communication Manager Feature Description and Implementation
• Administering Avaya Aura
®
Communication Manager
Button modules overview
You can add up to three BM12 or SBM24 button modules to the deskphones. All button modules
added to a single deskphone must be the same model. The maximum combined number of features
that you can configure on button modules is 48. You can configure all button module lines as long
as you do not exceed this maximum number.
When you use button modules, you might need to change the PoE settings on the IEEE switch. The
IEEE switch is on the back panel of the deskphones and is in low (L) state by default.
20 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com