• If VLANTEST is 0, the timer never expires.
Note:
Regardless of the setting of L2Q, VLANTEST, or L2QVLAN, you must have administer
DHCP on the phone so that the phone receives a response to a DHCPDISCOVER on
making that request on the default (0) VLAN.
After VLANTEST expires, if the phone receives a non-zero L2QVLAN value, the phone
releases the IP address and sends DHCPDISCOVER on that VLAN. Any other release
requires you to perform a manual reset before the phone attempts to use a VLAN on which
VLANTEST has expired.
For more information on the Reset procedure, see Installing and Maintaining Avaya IP
Deskphones 9608/9608G/9611G/9621G/9641G/9641GS H.323.
The phone ignores any VLAN ID administered on the call server if a non-zero VLAN ID is
administered either by LLDP, manually, through DHCP, or through the settings file.
Related Links
Administering a VLAN on page 75
VLAN separation rules and related parameters
VLAN separation is available to control access to the voice VLAN from the secondary Ethernet
interface, and to control whether broadcast traffic from the data VLAN is forwarded to the
deskphone.
The following system parameters control VLAN separation:
• VLANSEP - enables (1) or disables (0) VLAN separation.
• L2QVLAN - specifies the voice VLAN ID to be used by the deskphone.
• PHY2VLAN - specifies the VLAN ID to be used for frames forwarded to the network from the
secondary Ethernet interface.
• PHY2PRIO - the layer 2 priority value to be used for tagged frames forwarded to the network
from the secondary Ethernet interface.
Related Links
Administering a VLAN on page 75
VLAN separation rules on page 78
Administering a VLAN
August 2015 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP 77
Comments on this document? infodev@avaya.com
To Next Page
Loading...
