Parameter Type Default
value
Description
NO_DIGITS_TIMEOUT Integer 20 Specifies the duration for timeout when no digit is
entered. The range is from 1 to 60.
INTER_DIGIT_TIMEOUT Integer 5 Specifies the duration for timeout between entered
digits. The range is from 1 to 10.
FAILED_SESSION_REMOVA
L_TIMER
Integer 30 Specifies the timer to remove failed call session. The
range is from 5 to 999.
FAST_RESPONSE_TIMEOUT Integer 4 Specifies the fast response timer. The range is from
0 to 32.
RECOVERYREGISTERWAIT Integer 60 Specifies the interval for reactive monitoring. The
range is from 10 to 36000.
FAILBACK_POLICY String auto Specifies the fail back policy. Assign one of the
following values:
• admin
• auto
WAIT_FOR_INVITE_RESPON
SE_TIMEOUT
Integer 60 Specifies the maximum duration in seconds that the
phone waits to get a response after receiving 100
trying. The range is 30 to 180 seconds.
Deskphone interface settings parameters
Common operation
Parameter
Type Default
value
Description
BAKLIGHTOFF Integer 120 Specifies the idle time in minutes after which the
device turns off the backlight. The range is from 0 to
999.
Note:
The parameter is only applicable for the
registered devices that are currently logged-in.
RINGTONESTYLE Integer 0 Specifies the style of classic ringtone that the device
offers. Assign one of the following values:
• 0: For North American ringtones.
• 1: For European ringtones.
Table continues…
Configuration through the settings file
54 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
