Avaya 9601 - Audio Parameters; Logging and Debugging Parameters

Parameter Type Default
value
Description
LOCAL_DIAL_AREA_CODE Numeric 0 Specifies whether the user must dial area conde for
calls within same area code. Assign 0 or 1.
PHNLAC String Null Specifies the local area code.
Audio parameters
Name Description
Received Coding G.711, G.722, G.726A, or G.729
Packet Loss Missing, late, and out-of-sequence packets are
counted as lost if they are discarded. Packets are not
counted as lost until a subsequent packet is received
and the loss confirmed by the RTP sequence
number.
Packetization Delay The amount of audio data in each RTP
One-way Network Delay The number is half the value that RTCP or SRTCP
computes for the round-trip delay to the device
where the RTP is transmitted. For the calls that have
a large geographic distance this number is expected
to be larger than for local calls.
Network Jitter Delay The average delay introduced by the jitter buffer on
the deskphone.
Logging and debugging parameters
Parameter
Type Default
value
Description
SYSLOG_ENABLED Integer 0 Specifies whether the sys log notification is enabled.
Assign one of the following values:
• 0: Syslog off.
• 1: Syslog on.
SYSLOG_LEVEL Integer 3 Specifies the severity level. The device sends a
syslog message if an event occurs with a severity
level equal or less than the value specified in this
parameter. Assign one of the following values:
• 3: Error
• 4: Warning
• 5: Notice
• 6: Informational
Table continues…
Configuration through the settings file
46 Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP Deskphones SIP August 2015
Comments on this document? infodev@avaya.com