Avaya 9608 - Page 20

Administration Overview and Requirements
20 Deskphone SIP 9608, 9611G, 9621G, 9641G Administrator Guide Release 6.0.1
As shown in Administration alternatives and options, you can administer a given parameter in a
number of ways. The precedence, from lowest to highest, is:
1. LLDP, except for setting the call server and file server IP addresses, for which it has the
lowest precedence
2. DHCP, except as indicated in DHCPACK setting of parameter values
3. Settings file
Settings file Administering the DHCP and File Servers
on
page 63 and
Chapter 8: Administering Telephone Options.
Manual
administration at the
deskphone
“Static Addressing Installation” in the Avaya one-X™
Deskphone SIP Installation and Maintenance Guide
for 9608, 9611G, 9621G, and 9641G Deskphones
(Document Number 16-603604).
Network Time Server
(NTS)
DHCP
Settings file
Administering the DHCP Server on page 64 and
Network Time Protocol (NTP) server
on page 31.
Quality of Service Settings file Chapter 8:
Administering Telephone Options.
Interface DHCP Administering the DHCP and File Servers on
page 63, and Chapter 7:
Telephone Software and
Application Files.
Settings file Administering the DHCP and File Servers on
page 63, and Chapter 7: Telephone Software and
Application Files.
LLDP
Manual
administration at the
deskphone
About Link Layer Discovery Protocol (LLDP) on
page 119.
“Secondary Ethernet Interface Enable/Disable” in the
Avaya one-X™ Deskphone SIP Installation and
Maintenance Guide for 9608, 9611G, 9621G, and
9641G Deskphones (Document Number
16-603604).
Application - specific
parameters
DHCP Administering the DHCP and File Servers
on
page 63, and especially Administering the DHCP
Server on page 64. Also, Chapter 8: Administering
Telephone Options.
Settings file
(strongly
recommended)
Administering the DHCP and File Servers
on
page 63, and especially HTTP Generic Setup on
page 70. Also,
Chapter 8:
Administering Telephone Options.
Parameter(s)
Administrative
Mechanisms
For More Information See: