EasyManua.ls Logo

Avaya H.323 9608 - Creating the Pre-Installation Checklist

Avaya H.323 9608
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For subsequent downloads of software upgrades, the media server provides the capability for
a remote restart of the IP phone. When you restart the phone, the phone automatically restarts
and performs a download if new software is available. For more information, see About
software distribution packages on page 65 and Downloading software packages on
page 66.
Creating the pre-installation checklist
Before plugging in a 9608, 9608G, 9611G, 9621G, or 9641G , verify the following requirements.
If you fail to meet the requirements, the phone might not funtion properly and can negatively
impact the network. Print copies of this checklist for each server and deskphone.
Requirements for your network:
1. The LAN uses Ethernet Category 5e cable to run the IPv4 or IPv6 version of
Internet Protocol.
2.
Your call server must haveAvaya Aura
®
Communication Manager Release 6.0 or
later version installed.
Avaya only supports 9608, 9608G, 9611G, 9621G, and 9641G deskphones
running on Communication Manager 6.0 or later.
3. Verify that you have installed the following circuit packs on the switch:
TN2602 or TN2302IP Media Processor circuit pack. Avaya recommends that
sites with a TN2302 IP Media Processor circuit pack must install a TN2602 circuit
pack to benefit from increased capacity.
TN799C or D Control-LAN (C-LAN) circuit pack.
Important:
Release 6.0 or later requires TN799C V3 or greater C-LAN circuit pack(s). For
more information, see the Communication Manager Software and Firmware
Compatibility Matrix on the
Avaya Support website.
4. Verify that you have configured the Avaya call server correctly.
For more information, see Administering Avaya IP Deskphone H.323 9608,
9608G, 9611G, 9621G, and 9641G and Communication Manager documentation
on the Avaya Support website.
5. Verify that you have administered the DHCP server and application correctly.
See Administering Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and
9641G.
6. Verify that you have administered the HTTP/HTTPS server and application
correctly.
See Administering Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and
9641G.
Installing the Deskphone
14 Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
Comments? infodev@avaya.com

Table of Contents

Related product manuals