Avaya H.323 9608 - Logging off from the Phone

Procedure
1. When you select LOG from the Craft Local Procedure Screen, the deskphone
prompts you to use the Right and Left navigation arrows to select a setting and
displays the following text:
Log: text string Choice Selector
where the text string is the wording associated with the current system value of
NVLOGSTAT, defined as:
• Disabled when NVLOGSTAT = 0
• Emergencies when NVLOGSTAT = 1
• Alerts when NVLOGSTAT = 2
• Critical when NVLOGSTAT = 3
• Errors when NVLOGSTAT = 4
• Warnings when NVLOGSTAT = 5
• Notices when NVLOGSTAT = 6
• Information when NVLOGSTAT = 7
• Debug when NVLOGSTAT = 8
2. To change the setting, press the Right or Left navigation arrow to navigate through
the settings.
Depending on the current value, the next sequential text string is selected and
displayed as the setting. For example, if the current value is Alerts (2), pressing the
Right navigation arrow changes the value to Critical (3). If the current value is Debug
(8), pressing the Right navigation arrow changes the value to Disabled (0).
3. Press Save to store the new setting and redisplay the Craft Local Procedure
screen.
Logging off from the phone
About this task
Use the following procedure to log off from a phone.
Using local Administrative Menu procedures
58 Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014
Comments? infodev@avaya.com