The deskphone resets from the beginning of registration, which might take a few
minutes. The deskphone resets:
• All system values and system initialization values except AUTH and NVAUTH
to default values.
• The 802.1X ID and Password to their default values.
• Call server values to their defaults.
• Any entries in the Redial buffer.
• Do not affect user-specified data and settings like Contacts data or the
deskphone login and password. To remove this type of data, see
Clearing the
deskphone settings on page 51.
Restarting the phone
About this task
Note:
When updating local Craft Administration Menu procedures from a touch screen phone,
touching the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touch screen IP phone.
Use the following procedure to restart the phone.
Procedure
1. Select RESTART PHONE from the Craft Procedures screen. The phone displays
the following text:
Press Restart to confirm.
2. PressCancel to return to the Craft Procedures screen without restarting the
phone.
Press Restart to proceed with the registration steps. For more information, see
Powering-up and resetting the phone (Dynamic Addressing Process) on page 27.
A restart does not affect user-specified data and settings like Contacts data or the
phone login and password.
The completion of the restart procedure depends on the status of the boot and
application files.
Restarting the phone
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014 61
To Next Page
Loading...
