Note:
1. A 9608 and 9608G deskphone always lists the CONT procedure. Other color
deskphones list the CONT only if the deskphone has at least one button module
attached.
2. If the deskphone software has VPN and media encryption disabled, VPN will not
appear on the Craft procedures menu list. To determine if this applies to the
deskphone, go to the About Avaya IP Deskphone screen through the Avaya (A)
Menu or Home screen as applicable to the phone, and select the Settings list.
The About Avaya IP Deskphone screen with a U appended to the software
release indicates the phone has VPN and media encryption disabled.
Setting the operational mode to 802.1X
About this task
Use the following procedure to set or change the operational mode.
Note:
When updating local Craft procedures from a touch screen deskphone, touching the line
you want to change or the applicable softkey produces the same result as selecting a line
and pressing the applicable softkey on a non-touch screen IP deskphone.
Procedure
1. When you select 802.1X from the Craft Procedures screen, the deskphone
displays the following:
Supplicant:
Pass-thru:
where the Supplicant line is the text string associated with the current system value
of DOTIXSTAT. The DOTIXSTAT parameter configures the 802.1X Supplicant
Mode operation control, defined as:
The options that are displayed depend on the following parameters as set in the
settings file:
• Disabled if DOT1XSTAT = 0
• Unicast-only if DOT1XSTAT = 1
• Unicast/multicast if DOT1XSTAT = 2
and the Pass-thru line is a text string associated with the current system value
of DOT1X where:
Setting the operational mode to 802.1X
Installing and maintaining Avaya IP Deskphone H.323 9608, 9608G, 9611G, 9621G, and 9641GJanuary 2014 45
To Next Page
Loading...
