Error Tones
The phone provides an error tone when you make an invalid selection. You can disable the error
tone if required.
Procedure
1.
Press the button.
2. Use the cursor keys to select Settings.
3. Use the cursor keys to select Audio.
4. Use the cursor keys to select Error tones.
5. When completed, press Save.
6. Press Back/Exit to exit the menus.
Related links
Volume and Sound on page 153
Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
•
You can set the ring volume to zero, the phone displays a icon but still provides visual
alerting.
Procedure
1. With the phone idle or ringing, use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
Related links
Volume and Sound on page 153
Handset Volume
Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Procedure
1. With the call connected, use the + plus and – minus keys to adjust the volume.
2. The display returns to normal after a few seconds.
Volume and Sound
April 2020 J100 Series Phone User Guide 154
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
