7. Enter the required time in 24-hour clock format:
• Use either the * or # keys to enter the : separator.
• To delete the previous digit or character, press Bksp.
8. When a valid time has been entered, the display confirms that by showing the Set soft key.
9. To set the time as the new time to be used by the telephone system, press Set.
Related links
System Administration on page 169
Setting the Time Offset
The process below can be used when the telephone system does not obtain the time and date
automatically. On systems that are configured to obtain the time automatically, the option for
checking the Time Server Status is available instead. See Checking the Time Server Status on
page 170.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select System Administration.
• This option is only present if you have been configured as a system phone user by your
system administrator.
• This menu is not supported on the J139.
4. Enter your security PIN (login code) and press Done.
5. Use the cursor keys to select Local Time Offset.
6. The current offset is displayed.
7. Enter the offset required in hours and minutes:
• To enter the : separator press either the * or # key.
• To delete the previous digit or character entered press the Bksp key.
• To change the offset from between positive or negative press the right cursor key.
8. When a valid offset has been entered, the Set soft key is displayed.
9. To apply the offset to the current telephone system time, press the Set soft key.
Related links
System Administration on page 169
System Administration
April 2020 J100 Series Phone User Guide 172
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
