•
To switch from the headset to handsfree: Press the SPEAKER button. See Handsfree
Speaker Operation on page 93.
•
To switch to headset from handsfree: Press the
HEADSET button. The button remains
lit whilst you have a call connected handsfree.
•
To mute the call while on the headset: Press the
MUTE button. The button remains lit
whilst the call is muted.
Related links
Headset Operation on page 85
Headset Selection
The J179 can supports both traditional wired telephony headsets and, if fitted with the optional
wireless module, Bluetooth headsets. You can indicate which type the of headset the phone
should use.
Procedure
1.
Press the
button.
2. Use the cursor keys to select Settings.
3. Use the cursor keys to select Audio.
4. Use the cursor keys to select Headset selection.
5. Use the cursor keys to switch between Bluetooth or Wired.
6. When completed, press Save.
7. Press Back/Exit to exit the menus.
Related links
Headset Operation on page 85
Headset Caller Volume
While talking via the headset, you can adjust the volume of the caller.
Procedure
1. Use the + plus and – minus keys to adjust the volume.
2. Once you stop adjusting the volume, the display returns to normal after a few seconds.
•
If you set the volume to zero (off), the phone displays a icon.
Headset Operation
April 2020 J100 Series Phone User Guide 86
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
