Avaya JEM24 User Manual

Name Description
SCEP Server Specifies the URL address of the SCEP server.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.
Common Name Specifies the common name for the subject in an SCEP certificate
request.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “$SERIALNO”.
Subject Specifies the part of SUBJECT in an SCEP certificate request that
is common for requests from different device. For example,
Organizational Unit, Organization, Location, State, and Country.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.
CA Identifier Specifies the Certificate Authority Identifier.
Certificate Authority servers may require a specific CA Identifier
string to accept GetCA requests. If the device works with such a
Certificate Authority, the CA identifier string can be set through this
parameter.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “CAIdentifier”.
Initiate renewal on % of Validity
Interval
Specifies the percentage of the identity certificate’s Validity interval
after which renewal procedures will be initiated.
If the renewal time interval has elapsed, the phone starts to contact
the SCEP server periodically to renew the certificate.
The valid value is an integer from 1 to 90. The default value is 90
percent.
Phone behavior on Pending
request
Specifies the functioning of the device when performing certificate
enrolment.
The options are:
• Poll SCEP server periodically in background
• Wait until a certificate is received or rejected (default)
SCEP Password Specifies a challenge password to use with SCEP.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is “$SERIALNO”.
PKCS12
PKCS12 Address Specifies the IPv4 or IPv6 URL address, or FQDN from where a
PKCS#12 file is to be downloaded.
The valid value is a string of up to 255 ASCII characters without
any intervening spaces. The default value is empty.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 144
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English