Related links
Call Forward on page 171
Long-term acoustic exposure protection
You can enable the long-term acoustic exposure protection feature to protect the ears of the
headset user. Long-term acoustic exposure protection is supported only in L100 Series Headsets
with RJ9 connector, when the headset profile is set to Profile1. You can configure this feature by
using either the web interface or the 46xxsettings.txt file.
Note:
Avaya J129 IP Phone does not support long-term acoustic exposure protection.
Related links
Feature and application configuration on page 155
Long-term acoustic exposure protection parameter on page 172
Long-term acoustic exposure protection parameter
Use the 46xxsettings.txt file to set the following parameter.
Parameter name
Default value Description
ACOUSTIC_EXPOSURE_PROT
ECT_MODE_DEFAULT
1 Specifies the acoustic exposure
protection mode.
The options are:
• 1: Off
• 2: Dynamic
• 3: 4 hours
• 4: 8 hours
Note:
Avaya J129 IP Phone does
not support long-term
acoustic exposure
protection.
Related links
Long-term acoustic exposure protection on page 172
Feature and application configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 172
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
