Parameter name Default Value Description
TEAM_BUTTON_RING_TYPE 1 Specifies the alerting pattern to
use for team buttons.
Valid values are 1 through 8. The
default value is 1.
Note:
Avaya J139 IP Phone does
not support Team Button
feature.
Busy Indicator
With the Busy Indicator feature, the user can view idle or busy status of other users, and make
quick calls to them. The icon next to the Busy Indicator line key reflects the current state of the
monitored user.
In addition to icons, the indication of LEDs integrated into the Busy Indicator line keys shows the
monitored user status. No LED indication corresponds to the idle state of the user. If the monitored
user is busy, the right LED integrated into the line key lights green.
The user can also transfer calls to the monitored line, and make conference calls with the
monitored user. The Busy Indicator key labels can be customized as required using the Phone
keys customization menu.
Busy Indicator is configured on the Avaya Aura
®
System Manager. However, Busy Indicator line
keys can be relabelled and set to a specific location using the Pre-configuration of keys feature.
See
PHONEKEY parameter values on page 323 for more details.
Note:
This feature is available only in the Avaya Aura
®
environment.
Busy Indicator limitations
The following are the limitations for the Busy Indicator feature:
• Do not add more than 48 Busy Indicator lines per phone due to possible low performance.
• On the Avaya Aura
®
7.1.3.3 – 8.1.1, use 96x1 template in the Communication Profile of a
monitoring user. In this case, however, the label customization on the phone might not be
synchronized with the labels set on the Avaya Aura
®
System Manager.
Related links
Feature and application configuration on page 155
Feature configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 175
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
