Parameter name Default value Description
ADMIN_PASSWORD 27238 Specifies an authentication code for accessing
Admin menu. When the parameter
ADMIN_PASSWORD is set, then the parameter
PROCPSWD is not used.
You must provide an authentication code by
using the any of the following combinations:
• Numeric (0–9)
• Alphabet in upper case (A-Z)
• Alphabet in lower case (a-z)
• Special characters
Note:
• PROCPSWD supports only numeric values.
ADMIN_PASSWORD supports both
alphanumeric and special characters. Hence,
for enhanced security, use
ADMIN_PASSWORD instead of PROCPSWD.
• You can set the PROCPSWD and the
ADMIN_PASSWORD in either
46xxsettings.txt file or Avaya Aura
®
System Manager. However,
ADMIN_PASSWORD is supported on Avaya
Aura
®
System Manager 7.1.0 and later.
ADMIN_LOGIN_ATTEMPT_ALL
OWED
10 Specifies the allowed number of failed attempts
for accessing the Admin menu for a duration as
specified in the parameter. Valid values are
between 1 to 20.
ADMIN_LOGIN_LOCKED_TIME 10 minutes Specifies the duration for lockout when a user
reaches the maximum attempts limit for
accessing the Admin menu. Valid values are
between 5 to 1440 minutes.
Accessing the Admin menu after log in
Procedure
1. Navigate to Main Menu > Administration.
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
Related links
Configuring the phone using Administration menu on page 74
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 77
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
