Avaya JEM24 - Page 245

Parameter name Default
value
Description
ENABLE_AVAYA_ENVIRONMENT 1 Specifies whether the phone is
configured to be used in an Avaya
(SES) or a third-party proxy
environment.
Value operation:
• 0: Configured for 3rd party proxy
with SIPPING 19 features.
• 1: Configured for Avaya
environment with AST features
and PPM.
Note:
Set the parameter to 0 for IP
Office environment.
ENABLE_BLIND_TRANSFER 1 Specifies that whether the blind
transfer is enabled or not.
Value operation:
• 0: Disabled.
• 1: Enabled.
ENABLE_CALL_LOG Species if call logging and
associated menus are available on
the phone.
Value operation:
• 0: No
• 1: Yes
ENABLE_CONTACTS 1 Specifies if the contacts application
and associated menus are
available on the phone.
Value operation:
• 0: No. The phone disables the
Contacts option on the interface.
• 1: Yes
Note:
The parameter is set to 1 in IP
Office 10.1 or later. In previous
releases it is set to 0.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 245
Comments on this document? infodev@avaya.com