Remote I/O board and connector.
144 E1070 Service Manual
8 Network Connections
8.1 Default network settings feature
8.1.1 General Description:
The fieldbus network settings can now be set to their default values by holding the
SELECT key while powering the indicator on. The user must hold the SELECT key
while the indicator is powered on. While the SELECT key is being held, the user must
press the PRINT key. The display will show Fbus-d indicating that the network settings
have been set to their default values. The network settings will return to the configured
values the next time the indicator is powered on.
8.1.2 Fieldbus #1 default values:
Type: Ethernet 4 (server)
IP Address: 192.168.1.1
Subnet: 255.255.255.0
Gateway: 0.0.0.0
SMTP: 192.168.1.100
Port: 10001
To Next Page
Loading...
Need help?
General
