32
Model E1070 Indicator Service Manual
The top line consists of the following
commands:
ACT<sp>DSP<sp>UN<CR><LF>
= Active value-
= space
= Displayed Weight
= space
= Unit of measure
= Carriage return
= Line feed
When this sequence is sent to a printer, one of the printouts
shown above is produced. The one that is actually printed de-
pends on the active value on the display
As stated before, each application has a default print format but,
the indicator can print nine more formats that you can create
under the Serial menu, which is explained later in this manual.
Each custom format is numbered and can have a value of 1-9.
“G” for gross weight
“T” for tare weight
“N” for net weight
OR
OR
To Next Page
Loading...
