88
Model E1070 Indicator Service Manual
BATCH Application 1. From previous step 7, press the UNITS key. . .
BATCH is displayed.
2. Press the PRINT key. . .
PRINT is displayed. Use this item to print out a complete report of
accumulator totals.
3. Press the PRINT key . . .
Port 1 or PORT 2 is displayed. Use this item to select which port
to use for printing the report.
4. Toggle between PORT 1 and PORT 2 using the TARE or UNITS key.
Press the ENTER key when the choice you want is displayed. . .
Display shows BUSY briefly then returns to PRINT.
5. Press the UNITS key. . .
RECIPE is displayed. Use this item to create a recipe.
6. Press the PRINT key. . .
REC 0 is displayed.
7. Press the PRINT key to configure recipe #0 or use the TARE or UNITS
key to scroll to another recipe number. Press the PRINT key when the
recipe you want is displayed. . .
TYPE is displayed. Set the type of recipe; Constant (CONST) or
Percentage (%):
CONSTANT You set the weights for each ingredient and
the batch size is always the total of these
ingredient weights.
PERCENTAGE You set the percentage of a total batch for
each ingredient and you can pick a batch
size and each ingredient amount will be
calculated automatically.
GROSS You set the gross weight at which each
ingredient will stop. The ingredient is com-
plete when the gross weight on the scale
reads the value that was set, regardless of
the weight on the scale when the batch was
started.
8. Press the PRINT key. . .
Current setting is displayed.
9. Toggle between the choices by pressing the TARE or UNITS key. Press
the PRINT key when your choice is displayed. . .
Your choice is selected and TYPE is displayed.
Supervisor Menu—(continued)
To Next Page
Loading...
