Pro Tools | MTRX Studio Operation
8
To switch between control layers for the Control Room monitor path:
1 If necessary, press the PRE button so that it lights white.
2 Press the Speaker button (15) so that CR and the speaker indicator illuminate.
3 Press the Select button (14) to cycle through control layers 1–4.
To select either Headphone 1 or Headphone 2 for control focus:
1 If necessary, press the PRE button so that it lights white.
2 Press the Headphone button (16) so that the headphone indicator illuminates.
3 Press the Select button (14) to switch between Headphone 1 and Headphone 2.
4 The encoder, footswitch, and A, B, and C buttons now apply their assigned functions to the Headphone cue path (such as level ad-
justment).
To Next Page
Loading...
