Avid Technology Pro Tools MTRX Studio User Manual

Pro Tools | MTRX Studio Back Panel Connections 9
Pro Tools | MTRX Studio Back Panel Connections
Pro Tools | MTRX Studio Back Panel
1 IEC power connector.
2 Reconfig button (see Reconfig Button).
3 Footswitch — the footswitch can used for controlling the DADman monitor profile or talkback (see MTRX Studio Page).
4 Word Clock In and Out (BNC).
5 Loop Sync In and Out (BNC).
6 Ethernet 1 and 2 (network or Dante) — Two RJ45 Ethernet ports for Control and Dante (which can be set to switched or redun-
dant mode). In redundant mode the control network must be connected to port 1.
7 DigiLink Mini port 1, primary port.
8 DigiLink Mini port 2, primary or expansion port (configured in DADman software).
9 ADAT In and Out 1.
10 ADAT In and Out 2.
11 Main Monitor Out L and R (balanced 1/4-inch).
12 Line Out 1–8 (DB25).
13 Line Out 9–16 (DB25).
14 Mic Input 1 and 2 (XLR).
15 Line In 1–8 (DB25).
16 Line In 9–16 (DB25).
Pro Tools | MTRX Studio back panel
These inputs are shared with the instrument inputs on the front panel, select MIC inputs to use the back panel MIC inputs.
In addition to front panel and DADman control, the built-in Mic pres can also be controlled from Pro Tools (Mac only).
For more information, see
Network Fundamentals.
2
Fuse T1AH/250 VAC
Max. 45 VA
100 - 240 VAC 50/60Hz
FOOTSWITCH
MIC IN 2MIC IN 1
PORT 1 PORT 2
NETWORK
2
1
LINE IN 9 - 16
LINE IN 1 - 8
21 ADAT IN
21 ADAT OUT
LINE OUT 9 - 16
LINE OUT 1 - 8
MONITOR
L
RWC OUT LOOP OUT
WC IN LOOP IN
5
3
4
1
6
12
13118 9 102 7
15
1614

Avid Technology Pro Tools MTRX Studio Specifications

General

Brand	Avid Technology
Model	Pro Tools MTRX Studio
Category	Accessories
Language	English