Chapter 1: Introduction
3
For example, with sixteen analog input channels, each can be patched to Pro Tools Output channels and the Pro Tools input can be
patched to sixteen ADAT output channels. At the same time, two channels can be patched to the analog output.
It is essential that all digital signals connected to the MTRX Studio are synchronized to the same basic clock signal.
In order to patch IP Audio channels between different devices, use the Dante Controller software tool from Audinate (visit
www.audinate.com).
Before You Start
This guide provides basic information about using Pro Tools | MTRX Studio and DADman software.
System Requirements and Compatibility Information
Avid can only assure compatibility and provide support for hardware and software it has tested and approved.
For complete system requirements and a list of qualified computers, operating systems, hard drives, peripherals, and third-party devices,
visit http://www.avid.com/compatibility.
Conventions Used in Pro Tools Documentation
Pro Tools documentation uses the following conventions to indicate menu choices, keyboard commands, and mouse commands:
:
The names of Commands, Options, and Settings that appear on-screen are in a different font.
The names of physical switches on MTRX Studio are in displayed
in bold text.
The following symbols are used to highlight important information:
For details on how to configure the routing matrix, see Pro Tools | MTRX Studio Operation.
For information about installation, refer to the printed MTRX Studio Installation Guide that came with your unit.
Convention Action
File > Save Choose Save from the File menu
Control+N Hold down the Control key and press the N key
Control-click Hold down the Control key and click the mouse button
Right-click Click with the right mouse button
User Tips are helpful hints for getting the most from your Pro Tools system.
Important Notices include information that could affect your Pro Tools session data or the performance of your Pro Tools system.
Shortcuts show you useful keyboard or mouse shortcuts.
Cross References point to related sections in this guide and other Avid documentation.
To Next Page
Loading...
Need help?
General
