Appendix A: Specifications 54
Electrical Specifications
Power supply cord must be a light sheathed flexible cord according to IEC60227 (designation 60227 IEC 52) and include a protective
earth conductor having a green-and-yellow insulation. Cross-sectional areas min. 3 x 0.75mm.
Mechanical Specifications
Environmental Specifications
Power consumption 45 VA max.
Input voltage 90–260 VAC
100–240 VAC Nominal, 47–63 Hz
Mains fuse, mounted in IEC connector 1 A, T1AH/250V
Safety compliance N 60950-1:2006
Mains line plug type Correct type acc. to standard
110–125V UL817 and CSA C22.2 no 42
220–230V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4
240V BS 1363 of 1984.Specification for 13A fused plugs and switched
and un-switched socket outlets
Chassis standard 19”, 1 RU
Chassis depth, without connectors mounted 23.5 cm / 9.3”
Chassis body width 43.5 cm / 17.2”
Weight, not including I/O cards 2.8 kg / 6.5 lbs.
Operating Temperature 0–45º C / 32–113º F
Humidity 20–85% (non-condensing)
EMC compliance EN 55103-1, part 1: emission
EN 55103-2, part 2: Immunity
FCC 47 CFR part 15 (B): emission
To Next Page
Loading...
Need help?
General
