Chapter 1: Introduction 1
Chapter 1: Introduction
Pro Tools | MTRX Studio
Welcome to Pro Tools
®
| MTRX Studio. MTRX Studio is an extremely versatile multi-channel audio interface for Pro Tools | HDX
and Pro Tools | HD Native systems. MTRX Studio supports 16- and 24-bit audio with sample rates of 44.1, 48, 88.2, 96, 176.4, and
192 kHz. MTRX Studio provides two DigiLink™ Mini ports for up to 64 input and output channels with Pro Tools. MTRX Studio
provides 16 analog line inputs, 16 analog line outputs, two analog monitor outputs, two headphone outputs, and two analog inputs
for microphones or instruments. It also provides a 64 I/O channels Dante
®
IP Audio interface and 16 channels of ADAT
™
I/O,
Word Clock and Loop sync synchronization, and an input for a foot switch (for various DADman functions, such as talk back re-
mote control). Additionally, MTRX Studio provides built-in SPQ processing for room tuning, bass management, and equalizing of
cue and monitor signals.
MTRX Studio can be used a traditional recording interface, with mic and line analog I/O, phantom power, and two headphone jacks
on the front panel. MTRX Studio can also be used as a monitor controller output device for immersive audio post production ap-
plications with up to 9.1.6 channel layouts. Pro Mon monitor control functionality is available for EUCON
™
-enabled Avid devices
with MTRX Studio using DADman software.
MTRX Studio Features
MTRX Studio provides up to 64 discrete channels of audio for Pro Tools with two DigiLink Mini ports (Primary and Primary/Ex-
pansion).
Analog I/O
• 2 Instrument/Microphone inputs (with preamps)
• 16 analog line inputs (DB25)
• 16 analog line outputs (DB25)
• 2 monitor outputs (balanced 1/4-inch)
• 2 stereo headphone outputs
Digital I/O
• 64x64 Dante I/O
• 16x16 ADAT I/O
Synchronization
• Sample rates of 44.1–192 kHz
• Synchronization by Internal, Word Clock, Loop Sync, ADAT, or Dante IP
1
2
Pro Tools
®
| MTRX Studio
1
2
INST
LINK
To Next Page
Loading...
Need help?
General
