SPQ Processing 47
When the Bass Management preset have been applied to the output set it can be viewed and further edited in the monitor profile
window for the actual speaker set. As shown in the following pictures, the Bass Management filter configuration for each speaker
channels is visible when scrolling the window horizontally.
The settings shown in the right-hand columns reflect the selections made in the configuration window described above with the pa-
rameters listed out for each speaker channel. Each filter parameter can be edited individually for each channel. Note the column
Level sub. 0 dB indicates that the surround channel is summed with unity gain to the SUB. Also, the 10 dB gain for the LFE can
be seen. If a different gain structure for the sub signals is needed, this can be edited here. If a speaker format has been selected with
more than one SUB, a summing matrix can be established by editing the levels in the SUB columns to allocate SUB woofers to se-
lected surround speakers.
To Next Page
Loading...
Need help?
General
