SPQ Processing 46
When selecting Bass Management preset an editing window will appear as shown in the following picture.
All speakers in the profile will have applied a high pass filter, and the summing for the SUB woofer will have the applied the low
pass filter with the entered parameters. The Summing of the LFE source will have applied the selected low pass filter as well. A
10 dB gain on the LFE channel can be applied as well.
Note if 10 dB is applied to the LFE channel it will be active on the output speaker setting, and all sources selected to the speaker
set will get the additional gain on the LFE channel. Alternatively the raise in LFE gain can also be set in the input configuration
for the sources where this is needed.
To Next Page
Loading...
