EN3EN 2
CONTENTS
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - INSTALLATION PRECAUTIONS 04
3 - MAINTENANCE AND CLEANING 05
4 - RECYCLING 05
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT 06
2 - EQUIPMENT REQUIRED
(NOT INCLUDED) 07
C - INSTALLATION
1 - HAZARD ANALYSIS 08
1.1 - Regulations 08
1.2 - Specifications of the gate to motorise 08
1.3 - Safety check on the gate 08
1.4 - Safety rules 09
2 - ELIMINATING HAZARDS 09
2.1 - Subpanels 09
2.2 - Bottom edges 09
2.3 - Between the panels and the fixed
parts close to each other 10
2.4 - Prevention of other hazards 11
3 - INSTALLING THE MOTOR DRIVE 11
3.1 - Installing the stops 12
3.2 - Assembling the pivoting arm 13
3.3 - Installing the motors - for opening
towards the inside of the property 14
3.4 - Installing the motors - for opening
towards the outside of the property 20
4 - INSTALLING THE FLASHING LIGHT 25
5 - INSTALLING THE SET OF PHOTOCELLS 26
5.1 - Opening outwards 26
5.2 - Opening inwards 27
5.3 - 2nd set of photocells (optional) 28
6 - CONNECTIONS 30
6.1 - The mains electricity 30
6.2 - Motors 31
6.3 - Flashing light 31
6.4 - Photocells 32
6.5 - Control parts
(optional) 34
6.6 - Backup battery
(optional) 34
6.7 - Solar power kit
(optional) 35
D - BEGINNING OPERATION
1 - SETTINGS INTERFACE 36
2 - BASIC SETTINGS (MENU 1) 36
2.1 - Menu structure 36
2.2 - Photocell alignment procedure
(optional) 38
2.3 - Operating mode 38
2.4 - Time delay 38
2.5 - Motor force 39
2.6 - Speed 39
2.7 - Self-learning 39
2.8 - Programming remote controls 41
To Next Page
Loading...
