EN35EN 34
C - INSTALLATION
6.7 - Solar power kit (optional)
Please note that, while the motor drive can be powered by a solar kit, the connected module will
not be operational.
The 24V solar power kit is plugged into the same connector as the backup battery. The solar power kit
(which already has a battery) and a backup battery cannot be connected at the same time.
For installation, refer to the solar power kit instructions.
When a solar power kit is connected, if you press the “OK” button on the electronic card, the number of red
LEDs that light up indicates the battery charge level.
To Next Page
Loading...
