Avigilon ALTA - Rhombus; Milestone

theCamiosupportarticle.
Rhombus
TheRhombusintegrationslinksAvigilonAltaentryeventsanduserswithvideosinRhombus.Toenablethis
integration,designateauserwithread-onlyportalaccessandusethosecredentialstoenabletheintegration
intheRhombusconsole.RefertotheRhombussupportarticle.
Milestone
TosetuptheMilestoneVMSintegration,you'llneedtologintotheControlCenter,goto Appmarketplace>
GetappsandclickontheMilestonetile.DownloadandinstallMicrosoft.NET4.8,ACX,andMilestonePlugin.
TosetuptheAvigilonAltasystemintegrationontheMilestoneserver:
1. RuntheOpenpath_ACX_Pluginexe.
2. FindtheOpenpath_ACXexeandrunasadministrator.
3. ChangethefollowingsettingsunderMilestoneConfiguration:

Figure12MilestoneConfiguration
l
Localportisrequired,anditmustmatchtheportdefinedintheMilestoneAccessControlsettings.
l
Remotehostisrequired,anditmustbetheIPaddressofthemachinethatisrunningtheeventserver.
l
Milestonepluginhastwosettings,October-2019orBeforeOctober-2019—selecttheappropriate
versionforyoursetup.
4. ChangethefollowingsettingsunderOpenpathConfiguration:
App marketplace 119