Avigilon ALTA - Add Expansion Boards; Edit ACU Ports

Figure1CreateACU
AfteryouaddanACUtothesystem,youneedtoregisterit(alsoknownasprovisioning).ForSmartHubs,refer
totheAvigilonAltaInstallationGuide.ForSingleDoorControllers,refertotheAvigilonAltaSDCInstallation
Guide.
DisabletheStaticCloudIPconnection
l
GototheEditACUpage,anddeselecttheEnableStaticCloudIPtoggle.
NormalcloudoperationresumesaftertheStaticCloudIPconnectionisdisabled.
Addexpansionboards
YouneedtoeditACUswhenyouinstalladditionalexpansionboardsinexistingSmartHubs.
1. ToeditanACU,clickontheACUfromtheACUspage.
2. FromAddexpansionboard,selectandaddtheexpansionboard.
3. ClickSave.
EditACUports
FromtheEditACUpage,clickthePortstabtoviewandmanageACUports:
Devices 76