Avigilon ALTA - View Activated Video Intercom Reader

l
Tampersensorisenabled(default).Whenenabled,thevideoreaderwillrecordTamperDetected
eventswhenthevideoreaderistouchedormoved.
l
AdjusttheTampersensorsensitivity,lowerorhigher,dependingonyourneeds.
Note:Ahighersensitivitylevelmayproducefalsetamperevents,forexample,whensomeone
triggersaTouchtoUnlock.
6. ClickSave.
7.
OnthePortstab,clickthe Portbuttontoviewandmanagereader,relay,andWiegandports.
Fornextsteps,see:
l
Addzonesonpage52ifnotcreatedyet.
l
Addentriesonpage56andenterthedeviceintheControllerfield.
Note:Duringthisstep,youcanconfiguretheWiegandportonthevideointercomreader,asaninput
oroutput,forMobileGatewaymode.
l
InstallingtheVideoReaderPro/VideoReaderIntercomPro
1
Or,seetheQuickStartGuideintheboxortheOpenpathAccessControlSystemInstallationGuide.
Viewactivatedvideointercomreader
1. Afterprovisioning,returntotheControlCentertoviewtheactivateddeviceintheDETAILSsection.
2. Finishconfiguringvideosettings,intercomandroutingprofilesettings,ortoenableONVIF.
1
Formoreinformation,see:https://openpath.atlassian.net/servicedesk/customer/portal/16/article/1668284452?src=1724573529
89