Avigilon ALTA - Add Entry State

l
StrictSecurity—Allowsonlyinteractive2FAonsitemobileaccessandencryptedsmartcards.Excludes
allremote,1FA,andnon-encryptedmethods.
l
StandardSecurityMFA-PIN—Allowsmostmobileaccess,cards,andPINssupportedbyOpenpath
readers,andexcludesremotemobile1FAandthird-partyWiegandmethodsforMFAwithPINrequired
asthesecondfactor.
l
StrictSecurityMFA-PIN—Allowsonlyinteractive2FAonsitemobileaccess,PINs,andencrypted
smartcardsexcludingallremote,1FA,andnon-encryptedmethodsforMFAwithPINrequiredasthe
secondfactor.
TheTriggerMethodscolumnreferstothenumberofwaysthatanentrycanbeunlockedinthatparticular
state.
Figure10Entrystatemanagement
ClickonanEntryStateinordertoviewthetriggermethodsincludedinthatstate.
Addentrystate
1.
Clickthe buttonintheupper-rightcorner.
2. Enterthenamefortheentrystateandadescription.
3. Iftheentryrequirestwocredentialsfromeachuser,clicktheEnableMulti-Factorslider.
Sites 63