Avigilon ALTA - Page 144

l
Ifyouwantcredentialdatatopassdirectlythroughtothelegacypanel(withoutbeingauthenticatedby
theSmartHubACU),enableGatewayCredentialPass-Through.
l
IfyouwantuserswhomakeauthenticatedunlockrequestswithvalidOpenpathcredentialsbutdonot
havededicatedUseforGatewayWiegandIDstobesenttothelegacypanel,defineaDefaultGateway
CardNumberthatwillbesentinstead.
l
Ifyouwanttosendindividualusercredentialstothelegacypanel(insteadofsettingupaDefault
GatewayCardNumberfortheentry)youcancreateaWiegandcardcredential(physicalcardnot
required)fortheuserandenableUseforGateway.Thisway,thatcardnumberwillbesenttothelegacy
panelwhenevertheusermakesanauthorizedunlockrequestusinganyoftheuser'svalidOpenpath
credentials.Thisisusefulifyouwanttouseone-to-onecredentialmappingforaccurateuser-level
reportingwithinthelegacysystem.SeeADDAWIEGANDCREDENTIAL.
Appendix A: Configure Avigilon Alta Control Center with legacy systems 144