47User Manual
Activation can be obtained in two ways:
1. The Flight Plan page displays each leg with the first Waypoint highlighted.
To activate a leg of the Flight Plan, use the cursor key to select the leg and
press ‘GOTO’. This will activate navigation to that Waypoint. This method
is useful when continuing a Flight Plan after a stop. The letter “A” (Acti-
vated) will be shown near the chosen Waypoint.
2. The Flight Plan Menu allows you to Activate/Deactivate the Flight Plan
by the following procedure:
> ‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENTER’ + Select Waypoint + ‘MENU’ + “ACTIVATE/
DEACTIVATE FP” + ‘ENTER’ + ‘CLEAR’
NOTE
The first line of the Flight Plan menu will read “Activate”or “Deactivate” dependent upon the
current status of the Flight Plan mode.
It is necessary to deactivate a Flight Plan before activating another. Other Flight
Plans can be created or edited while another Flight Plan is “Active”.
In addtioni, the Flight Plan can be activated/deactivated from the GOTO Menu
box.
> ‘GOTO’ + “ACTIVATE FP” OR “DEACTIVATE FP” + ‘ENTER’
This will activate/deactivate the currently Viewed Flight Plan (See Sec.3.5.1.).
6.4 NAMING A FLIGHT PLAN
The EKP-IV allows you to create a user defined name of 12 alphanumeric char-
acters for each Flight Plan. This name will appear at the top of the page when
viewed and in the Flight Plans List when viewing all Flight Plans. To edit the
default name:
> ‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENTER’ + ‘MENU’ + “RENAME FP” + ‘ENTER’
Use left/right cursor key to select the field and the up/down cursor key to
insert the desired name. At any time in the rename screen, ‘ENTER’ will acti-
vate the name change.
6.5 CLEAR A FLIGHT PLAN
This will delete the Flight Plan from the EKP-IV memory enabling another
Flight Plan to be created in this FP number:
> ‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENTER’ + ‘MENU’ + “CLEAR FP” + ‘ENTER’
A Warning window will appear to confirm deletion: press ‘ENTER’ to con-
firm, ‘CLEAR’ to abort.
To Next Page
Loading...
