36
User Manual
3.5.8.4 Marine Settings
The Marine Settings menu controls the detail shown from a C-MAP Marine
Compact Flash.
Lights: ON/OFF/NO SECTOR. When Lights are On lights are shown on
lighthouses and other lights that rotate, a light sector is displayed to show the
range of coverage for the light. In the No Sector setting the light is shown
without sector. The default setting is On.
Chart Boundaries: ON/OFF/AUTO. The default setting is On.
Bathymetric & Soundings: ON/OFF. The default setting is On.
Bathymetric & SND Range: Sets the min/max value for Bathymetrics and
Soundings. If the depth unit is Meter (MT), the range is [0 - 15000], if Feet (FT)
is [0 - 49212], if Fathom (FM) is [0 - 8202]. The default setting is [0, 33] FT.
Depth Area Limit: Sets a reference depth value (in the range [0 - 30000]). The
Depth Areas shown on the screen are filled with three different shades of blue.
Selecting the Min and Max values in the range of Depth Limit, there are three
areas: [0, Min] colored with dark blue, [Min, Max] colored in blue and [Max,
15000] colored in light blue. The default setting is 6 Ft for Depth Areas Limit 1
and 50 Ft for Depth Areas Limit 2.
Navigational Aids: ON/OFF. The default setting is On.
Attention Areas: ON/OFF/CONTOUR. The default setting is Contour.
Tracks & Routes: ON/OFF. The default setting is On.
3.5.8.5 Other Settings
User Points: OFF/ICON/ICON LABEL. The default setting is Icon/Label.
Objects Overlap: ON/OFF. The default setting is On. When more then one
object is at the same position, the selection of On allows the screen to draw the
objects overlapping.
LAT/LON Grid: ON/OFF. The default setting is Off.
3.5.9 SELECTIVE DISPLAY SETTINGS
In addition to the above Moving Map Settings the Selective Display feature
allows you to further customize the display by selecting the chart scale level at
which the category of data will begin displaying on the map. This feature is
extremely useful in decluttering the screen in populated areas or at times when
you want to focus on a single category of data, i.e. medium airports only.
> ‘MENU’ + “SELECTIVE DISPLAY...” + ‘ENTER’
Scroll through the cells using the cursor key. To select the desired scale you would
like the map to begin displaying data for the category, place the cursor within the
cell and press ‘ENTER’. (The map scale for the cell is displayed at the top right.)
Any box with an “X” indicates the feature is not available at that chart scale.
All data for that category will begin to display at that chart scale checked and
all scales below.
To Next Page
Loading...
